Small T5 push on plastic lamp holder
20 x 20 x 9mm
Idea in situations where you are short of space.
Part Number : T5BH50
T5 lamp holder design to be held in a tray.
The T5 fluorescent tube sides into the T5 holder and
twist the tube half way round to make a connection
28 x 19 x 9.5mm
hold size 19 x 9.5mm
Part Number : T5BH58
T8 lamp holder design to be held in a tray.
The T5 fluorescent tube sides into the T5 holder and
twist the tube half way round to make a connection
35 x 26 x 9.5mm
hold size 26 x 9.5mm
Part Number : T8BH8
Push on T8 plastic T8 fluorescent tube holders
30x30x10mm
Part Number : T8BH80
IP65 T8 lamp holder
has a rubber ring inside the holder
when screwed together crates a water tight seal around the T8 fluorescent tube
60 x 50 x 40mm
held in place with two screws
idea for lighting up a fish tank and aquarium
Part Number : T8IP65
A easy to use wire connector for three wire
No screws needed just push the in the hold and the wire is connected
30 x25x15mm
Part Number : Co3
T8 metal and plastic Terry clip
Part Number : T8terryclip
T5 metal and T5 plastic terry
Part Number : T5terryclip
IP65 T5 lamp holder
has a rubber ring inside the holder
when screwed together crates a water tight seal around the T5 fluorescent tube
60 x 46 x 38mm
hold size 25 x 17mm
idea for use in light up a fish tank and aquarium
Part Number : T5IP65
Push on T5 plastic bulb holder
25 x 19 x 14mm
Part Number : T5BH52
Long T5 connector
29x18x11mm
Idea insiduasion clip the bulb holder into place
Part Number : T5BH56
