Fit Anywhere Fluorescent Lighting
It can be use to create special effect in
nightclubs,
offices and in your own home.
This type of light fitting is very simple
to install
just screw the terry clips to a surface and just push the Sticklight into
place.
The sticklights can come with white or black cable and
endcap and the cable came be made longer if required
A Stick light is a T5 fluorescent lamp wired to 1.5
m 4 core cable
inside a 30mm diameter polycarbonate tube with a white or black end cap
on each end
Comes in Any Colour of YOUR CHOICE.
Diameter of the end cap on the stick light is 32mm.
| A |
black or white Endcap |
| B |
30mm Polycarbonate tube |
| C |
T5 connector |
| D |
T5 fluorescent lamp |
| E |
1.5m of 4 Core cable |
A Complete twin 21w StickLights
28w Pink StickLight
35wT5 blue sticklight
A 21w coloured 840 StickLight wiring to a
sealed 21w electronic ballast
A 35w StickLight with a black lead to a sealed
35w long life electronic ballast to a 2Amp 240v plug
The stickLight above
Is a 28w T5 fluorescent tube is inside a polycarbonate
tube with white caps
to about 1.5 meter flex
|
length of Stick lighting |
|
13watts 575mm |
|
14watts 600mm |
|
21watts 900mm |
|
28watts 1200mm |
|
35watts 1500mm |
wiring of electronic ballast
A single electric ballast to a stick light
Wiring of the supply voltage
A double ballast wire to two sticklights
Down load how to wiring a sticklight to a ballast