Low Voltage Waterproof led Light Fittings

LOW VOLTAGE LIGHTS

DRECTING LIGHTING IN ONE DIRECTION

IDEALLY FOR WASHING DOWN AREAS

VERY LOW RUNNING COST

EASY TO INSTALL

IDEA FOR CNC MACHINE AS WELL AS TRAWLER SHIPS

Low Voltage Waterproof Linear Led Lighting

Our stunning IP66 LED light fittings are perfect for today’s environments and industrial with its slim design and amazing light output. Using the latest electronics and LEDs technology on the market today. The light has an outstanding energy efficiency on running costs compared to other similar LED fittings on the market within the UK. As well be constructed in the UK.

The IP66 waterproof LED light fitting has the capability to be used in damp and dusty or wet conditions, withstanding the shocks and vibrations of everyday life. Making it outperform any T8 fluorescent tubes fittings and even the T5 fittings and stronger then these vapour light fitting. The IP66 waterproof Cylinder light is a perfect replacement light fitting with its easy to install in most places capabilities, with just two plastic terry clips to hold the light in place.
Complies with IEC and FCC electrical and safety standards.

Idea for Industrial, CNC Machinery ,Factories and Work Places,trawler shipping

Email us for more information
cylinder aluminum heat sink

LED cylinder lights are very simple to installed. There no need to cut large holes in the ceiling.
just fitted the light directly to a ceiling or even can be used with a suspention kit .
These lights normal come with a 1 metre power cable and could be made long you if required.

suitable for outdoor use or in environments with high levels of dust and water mist i.e.
Fitting has a cool white finish and a top quality aluminium tray for heat distribution.

Technical specification

high powered LEDs
IP66 Rated
Wide beam angle of 135 degrees.
Colour temperature of 6500k.
lifespan of over 100,000 hours.
Operating temperature -40C to +50C (-40f to +122f).
Came be dimmable
2 year warranty on the LEDS and electronics.

FITTING

The cylinder lights is held in place with two specially designed plastic terry clips, which simply clicked in place holding the unit secure, with the capability of easily adjusting the beam of light in the direction you need the light to focus on. If needed can is supply with galvansized metal guard to go over the fitting for add protection.

END CAPS

The 50mm plastic end caps come in two colours, white or black,which has two groves in the wall of the end cap where there is rubber O-ring neatly sealing the unit when the endcap is push inside the end of the 52mm cylinder light tube One end cap has a sealed plastic gland for the mains cable to go through.

black water 50mm end caps white 60mm end caps

TERRY CLIPS

50mm inside diameter terry clips are made from a type of springable plastic which will bend when inserting the light fitting into the clip.
The outer diameter of the plastic clip with the fitting in place is 60mm width.

black 50mm plactic clip white 50mm plactic clip white 50mm plactic clip cylinder guard

Linear Led Cylinder lights

Code Length Current Volts Lum
Cyl12DC 320mm 0.07mA 12v DC 2500
Cyl24DC 320mm 0.035mA 24v DC 2500
Cyl12AC 320mm 0.07mA 12v AC 2500
Cyl24AC 320mm 0.035mA 24v AC 2500
Cyl48DC 620mm 0.7mA 24v DC 3500
Cyl50DC 620mm 0.7mA 48v DC 6700
Cyl48AC 620mm 0.7mA 24v AC 3500
Cyl50AC 620mm 0.7mA 48v AC 6700
Cyl96DC 1140mm 1.4mA 24v DC 7000
Cyl248DC 1140mm 1.4mA 48v DC 13,400
Cyl96AC 1140mm 1.4mA 24v AC 7000
Cyl248AC 1140mm 1.4mA 48v AC 13,400